Details:-
This module is a digital line tracking sensor you can use with Arduino to make a better line follower robot that can sense 8 way of black and white lines. The more ways it can sense, the more resolution the sensor gets!
LM35D Analog Temperature Sensor Module
Details:-
- Based on the semiconductor LM35 temperature sensor
- Can be used to detect ambient air temperature
- Calibrated directly in °Celsius (Centigrade)
- Linear + 10 mV/°C Scale Factor
- 0.5°C Ensure accuracy (at +25°C)
- Low power consumption, less than 60uA
- Low output impedance, 1mA current through only 0.1Ω
- With screw holes for easy installation and fixed. Aperture 2.6mm
DS18B20 Temperature Sensor Module[Repeated]
Details:-
- Digital signal output
- 18B20 Temperature Sensor Chip
- Resolution adjustment ranges from 9-12 bytes.
- Send data via a pin
- Temperature measurement ranges: -55°C to +125°C, be accurate to 0.5°C.
pH sensor Kit with pH Electrode Probe
Details:-
- Module power supply: 5 VDC.
- Measuring temperature: 0-50 ℃.
- Response time: ≤ 1min.
- pH sensor with BNC connector.
- Gain adjustment Potentiometer.
- Power indicator LED.
IR Pulse (Heart Rate) Sensor Module
Details:-
This component is ideally suited for adding heartbeat sensing to the project.
Water Level Depth Detection Sensor Module
Details:-
This water level sensor module has a series of parallel exposed traces to measure droplets/water volume in order to determine the water level
Pulse Rate sensor
Color-Coded Cable, with standard male header connectors. Plug it straight into an Arduino or a Breadboard. No soldering is required. It combines a simple optical heart rate sensor with
Ultrasonic Intelligent Bluetooth Robot Car by KitSmart
- This car kit comes with all the modules, board, sensors, body and other accessories
- Comes in durable box
- Code and instructions will be provided along with the kit.
Raindrop Sensor
Details:-
- Adjustable sensitivity
- Output LED indicator
- Compatible with Arduino
24 in 1 Sensors DIY Learning Kit
- For young innovators who are interested in amazing world of DIY projects using Arduino
- A comprehensive kit having 24 most commonly used sensors and other useful components
- Good quality sensors
- Attractive packaging
- Detailed instructions included
Teensy 4.1 Development Board
Details:-
- ARM Cortex-M7 at 600MHz
- 1024K RAM (512K is tightly coupled)
- 8 Mbyte Flash (64K reserved for recovery & EEPROM emulation)
- USB Host Port
- 2 chips Plus Program Memory
- 55 Total I/O Pins
Teensy 3.2 Development Board
Details:-
- 32 bit ARM Cortex-M4 72 MHz CPU (M4 = DSP extensions)
- 256K Flash Memory, 64K RAM, 2K EEPROM
- 21 High-Resolution Analog Inputs (13 bits usable, 16-bit hardware)
- 1x 12 bit DAC Analog output
- 34 Digital I/O Pins (16 shared with analog)
- 12 PWM outputs
- 7 Timers for intervals/delays, separate from PWM
- USB with dedicated DMA memory transfers
- 3 UARTs (serial ports)
- SPI, 2x I2C, I2S, IR modulator
- I2S (for the high-quality audio interface)
- CAN Bus
- Real Time Clock (with user-added 32.768 crystal and battery)
Teensy 3.5 Development Board
Details:-
- 120MHz ARM Cortex-M4 with Floating Point Unit
- 512K Flash, 192K RAM, 4K EEPROM
- Microcontroller Chip MK64FX512VMD12
- 1 CAN Bus Port
- 16 General Purpose DMA Channels
- 5V Tolerance on All Digital I/O Pins
- 62 I/O Pins (42 breadboards friendly)
- 25 Analog Inputs to 2 ADC with 13-bit resolution
- 2 Analog Outputs (DAC) with 12-bit resolution
- 20 PWM Outputs (Teensy 3.6 has 22 PWM)
- USB Full Speed (12Mbit/sec) Port
- Ethernet mac, capable of full 100Mbit/sec speed
- Native (4-bit SDIO) micro SD card port
Teensy 3.6 Development Board
Details:-
- 180 MHz ARM Cortex-M4 with Floating Point Unit
- 1M Flash, 256K RAM, 4K EEPROM
- Microcontroller Chip MK66FX1M0VMD18
- USB High Speed (480Mbit/sec) Port
- 2 CAN Bus Ports
- 32 General Purpose DMA Channels
- 22 PWM Outputs
- 4 I2C Ports
- 11 Touch-Sensing Inputs
- 62 I/O Pins (42 breadboards friendly)
Teensy 4.0 Development Board
Details :-
- ARM Cortex-M7 at 600 MHz
- 1024K RAM (512K is tightly coupled)
- 2048K Flash (64K reserved for recovery & EEPROM emulation)
- 2 USB ports, both 480 MBit/sec
M5Stack C3 Mate with Pin Headers
Details:-
- Brand: M5 Stack
- Model: C3
- Product: Mate with Pin Headers
- Voltage: 5V
- Peak temperature = 230℃
- Weight: 3.8g
M5Stack ESP32 GRAY Development Kit with 9-Axis
Details:-
- Processor: ESP32
- Color: Gray
- Built-in Speaker, Buttons, LCD
- M-Bus Socket & Pins
- Development Platform UIFlow, MicroPython, Arduino
4 channel Relay 5v
Details:-
- 5V 4-Channel Relay interface board and each one needs 15-20mA Driver Current.
- Equipped with high-current relay, AC250V 10A; DC30V 10A.
- Standard interface that can be controlled directly by microcontroller (for Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).
- Indication LED’s for Relay output status.
8 channel Relay 5v
Details:-
- The 8550 transistor drive, driveability.
- A fixed bolt holes for easy installation.
- It has a relay status indicator led Power LED(Green), 8 relay status indicator LED(Red)
- Relay control interface by single-chip IO.
- Low-level suction close, high-level release.
- Easy to use, simple 3 line structure.
16 Channel Relay 12v
Details :-
- 12V relay with AC contact capacity of 10A 250V and optocoupler protection.
- Onboard power supply module does not need an external power supply. I / O port driver is active low.
- The module can be used as microcontroller development board module and also as appliance control, PLC extended output.
- It is using the industry’s top -quality isolation optocouplers, strong anti-jamming ability, stable performance.
- The 1-16 road can be any full on/off or any road.
- All interfaces can be directly connected through the terminal leads, very convenient.
