What's New
Audio, Speaker
2″ Inch 4 Ohm 3 W Speaker Full Range For Mini Stereo Speakers – DIY Kits – 2 pieces
-6%
Audio, Speaker
2″ Inch 4 Ohm 3 W Speaker Full Range For Mini Stereo Speakers – DIY Kits – 2 pieces
High sensitivity, loud voice, good and clear sound quality. 2pcs 2″ 4Ohm 3W Full Range Audio Speaker Stereo Woofer Loudspeaker for Arduino.
Speaker’s outer diameter: 52mm(2 inches); Screw hole distance: 42mm; speaker height: 25mm; Magnet diameter: 45mm.
Magnet speaker is designed with aluminum shell, internal magnetic type, easy to install.
Application: DIY bluetooth speaker, mini box speakers, music player, doorbell, computer, multimedia speakers, etc.
SKU: n/a
![3v-3.7V Round COB led Light [ Color - Cool White ]-Smartiphi-Main](https://smartiphi.com/wp-content/uploads/2022/10/3v-3.7V-Round-COB-led-Light-Color-Cool-White-Smartiphi-Main-300x300.jpg)
Modules, Power Supply Boards
Breadboard Power Supply Module 3.3V/5V
Breadboard power supply module, compatible with 5V, 3.3V.
Apply to MB102 breadboard
Input voltage: 6.5-12 V (DC) or USB power supply
Output voltage: 3.3V/5V can switch over
Maximum output current: <700 ma
Fluctuation two road independent control can switch over to 0 V, 3.3 V, 5 V
On-board two groups of 3.3V, 5V DC output plug pin, convenient external lead use.
SKU: n/a
Display Module, Modules, Modules & Sensors
Arduino UNO 3.5 inch TFT screen
Resistive touch screen TFT LCD, 3.5inch, 480×320 resolution
Standard Arduino interface, compatible with development boards like Arduino UNO, Leonardo, UNO PLUS, NUCLEO, XNUCLEO
Onboard stand-alone touch controller, better touching than solutions that use AD pins directly for touch control
PWM backlight control allows adjusting the backlight to a comfortable level
Micro SD slot, provides an easy way to store photos for displaying
Controlled via SPI, only a few Arduino pins are used
Comes with STM32 and Arduino examples, convenient for porting
SKU: n/a
Interface Modules, Modules
IIC/I2C Serial Interface Adapter Module
5V power supply.
Serial I2C control of LCD display using PCF8574.
Backlight can be enabled or disabled via a jumper on the board.
Contrast control via a potentiometer.
Can have 8 modules on a single I2C bus (change address via solder jumpers)address.
SKU: n/a
Best Selling Products
Connectors, JST Connectors
JST SM 2 Pin Plug Male and Female Connector Adapter with 150 mm Electrical Cable Wire for LED Light
-28%
Connectors, JST Connectors
JST SM 2 Pin Plug Male and Female Connector Adapter with 150 mm Electrical Cable Wire for LED Light
Length:15cm and wire diameter:1.5mm
Each connector has 2 pieces of wires, one is black, the other is red
Product includes JST SM 2 pin male and female connectors
Material: Silicone material, easy to peel off.
Use: For a variety of conventional indoor LED Strip, 505035283014 RGB color Led Strip.
Good Quality Wire
SKU: n/a
Modules & Sensors, Sensors, Temp, Humidity & Gas Sensors
W1209 Digital Temperature Controller Thermostat Module
-20%
Modules & Sensors, Sensors, Temp, Humidity & Gas Sensors
W1209 Digital Temperature Controller Thermostat Module
Details:-
Temperature Control Range(°C): -50 to +110
Resolution @-9.9°C to +99.9°C: 0.1°C
Resolution @all temperatures: 1°C
Accuracy: 0.1°C
Refresh Rate(s): 0.5
Supply Voltage(V): 12
Measuring Inputs: NTC10K
Cable Length: 0.5 Meter
Output Type: 1 Channel Relay Output
Capacity: 10A
SKU: n/a
![[Type 1] 12V Mini Air Pump Motor for Pet Aquarium Tank (with Side Brackets)-Smartiphi-main](https://smartiphi.com/wp-content/uploads/2022/11/Type-1-12V-Mini-Air-Pump-Motor-for-Pet-Aquarium-Tank-with-Side-Brackets-Smartiphi-main-300x300.jpg)
Modules & Sensors, Relays
8 Channel Relay 12v
Details:-
Using high-current relay, AC250V 10A DC30V 10A.
Contact some independent wiring, safe and reliable.
The standard interface can be extended to a variety of development boards.
With fixed screw holes for easy installation.
Suitable for a variety of platforms such as 8051/AVR/AVR/ARM.
SKU: n/a
Modules & Sensors, Relays
16 Channel Relay 12v
Details :-
12V relay with AC contact capacity of 10A 250V and optocoupler protection.
Onboard power supply module does not need an external power supply. I / O port driver is active low.
The module can be used as microcontroller development board module and also as appliance control, PLC extended output.
It is using the industry’s top -quality isolation optocouplers, strong anti-jamming ability, stable performance.
The 1-16 road can be any full on/off or any road.
All interfaces can be directly connected through the terminal leads, very convenient.
SKU: n/a
Boards, Development Boards, ESP
ESP32 WROOM-32 module with 38 Pins
1. 2.4GHz Dual-Mode WiFi + Bluetooth Development Board, 38PIN
2. Ultra-Low power consumption works perfectly with the IDE
3. Support LWIP protocol, Freertos
4. Support Three Modes: AP, STA, and AP+STA
5. ESP 32 is safe, reliable, and scalable to a variety of applications
SKU: n/a
Audio, Speaker
2″ Inch 4 Ohm 3 W Speaker Full Range For Mini Stereo Speakers – DIY Kits – 2 pieces
-6%
Audio, Speaker
2″ Inch 4 Ohm 3 W Speaker Full Range For Mini Stereo Speakers – DIY Kits – 2 pieces
High sensitivity, loud voice, good and clear sound quality. 2pcs 2″ 4Ohm 3W Full Range Audio Speaker Stereo Woofer Loudspeaker for Arduino.
Speaker’s outer diameter: 52mm(2 inches); Screw hole distance: 42mm; speaker height: 25mm; Magnet diameter: 45mm.
Magnet speaker is designed with aluminum shell, internal magnetic type, easy to install.
Application: DIY bluetooth speaker, mini box speakers, music player, doorbell, computer, multimedia speakers, etc.
SKU: n/a
DIY Kits
-
DIY Kits, Robotic Kits
65mm Robot Wheel for BO Motors
- A tire with sponge liner for more strength
- With upgraded tire tread for greater friction
- New design wheel for better combination with the motor
- Diameter: 65 mm
- The material of Wheel: High-strength plastic
- The material of Tyre: Rubber
- Color: Yellow
SKU: n/a -
-
-
DIY Kits, Robotic Kits
Robot Smart Car Chassis – Transparent
Details:-
- Smart car chassis tracing car Robot car chassis with code disk, Ideal for DIY.
- With a 4 AA battery box (batteries not included).
- It can be used for distance measurement, velocity.
- Can use with other devices to realize function of tracing, obstacle avoidance, distance testing, speed testing,
- Size: 21 x 15 cm (L x W).
- Wheel size: 6.5 x 2.7cm (Dia. x H).
SKU: n/a -
DIY Kits, Glue Gun Kits
20 WATT Glue Gun with 5 Glue Sticks 8 inch Long
- Comes with Brass Nozzle to retain heat in the most efficient way
- Ideal for crafts, home decor, maintenance and more, gun output 60W -100W
- The Trigger feed controls the flow of the glue.
- Its unique handle grip design makes it easy to use and can be used by anyone or every one.
- A glue gun is very useful for sticking everything without getting messy or dirty.
SKU: n/a -
-
Development Kits, DIY Kits
Arduino Nano Development Kit – Beginner Series
Details:-
- Great development kit to get started in the DIY world of DIY electronics, IOT and embedded systems.
- The Kit includes Arduino Nano, LCD, SG-90 Servo motor and various other sensors and
actuators to get you started. - Comes in durable box
SKU: n/a -
Development Kits, DIY Kits
Arduino Mega Development Kit – Advance Series
- Great for creating projects with Arduino Mega
- Can be used to create over 25 projects
- Comes in durable storage box
- A variety of components are included in this pack to try out different projects.
- The kit comes with 40 unique quality components assured by Smartiphi.
- All-in-one kit, a great starter kit for learning to code.
- Comes with Arduino Mega
SKU: n/a -
Development Kits, DIY Kits
Arduino Uno R3 Development Kit – Advanced Series
Details:-
- Great for running innovative projects with Arduino
- Can be used to create over 20 projects
- Comes in durable storage box
- A variety of components are included in this pack to try out different projects.
- The kit comes with 47 unique quality components assured by Smartiphi.
- All-in-one kit, a great advanced kit for innovating new projects.
- Uno Microcontroller ATmega328 (SMD) – Interface CH340G
SKU: n/a
Development Boards
-
Boards, Development Boards, ESP
ESP 12E ESP8266 Wifi Wireless IoT Board Module
- WS2812 Led on board.
- 802.11 b/g/n
- Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLL, regulators, DCXO and power management units
SKU: n/a -
Arduino, Boards, Development Boards
Arduino Mega 2560 R3 Board – Compatible Model High Quality
- Microcontroller CH340
- Operating Voltage 5V
- Input Voltage (recommended) 7-12V
- Input Voltage (limits) 6-20V
- Digital I/O Pins 54 (of which 15 provide PWM output)
- Analog Input Pins 16
- DC Current per I/O Pin 40 mA
- Dimensions : 111 x 54 x 12 (LxWxH) mm.
SKU: n/a -
Boards, Development Boards, Programmers
TL866II Plus Universal Programmer
- Model: TL866II Plus
- With Multi-functional ICSP interface
- 40pin ZIF socket, fully automatic, support fast mode SPI
- USB interface for both data transfer and power supply
- With over-voltage and over current protection
- Supports the serial number of the chips two times development, built-in a variety of commonly used automatic numbering functions
- English Language Support
- It can program faster than other programmers
SKU: n/a -
Boards, Development Boards, ESP
ESP32 WROOM-32 module with 38 Pins
1. 2.4GHz Dual-Mode WiFi + Bluetooth Development Board, 38PIN
2. Ultra-Low power consumption works perfectly with the IDE
3. Support LWIP protocol, Freertos
4. Support Three Modes: AP, STA, and AP+STA
5. ESP 32 is safe, reliable, and scalable to a variety of applicationsSKU: n/a -
-
Boards, Development Boards, ESP, Others
ESP-01 ESP8266 Development Module
- 802.11 b/g/n Standards
- Wi-Fi Direct (P2P), soft-AP
- 1MB Flash Memory
- Integrated low power 32-bit CPU could be used as an application processor
- A-MPDU & A-MSDU aggregation & 0.4ms guard interval
- Wake up and transmit packets in < 2ms
- Standby power consumption of < 1.0mW (DTIM3)
SKU: n/a -
-
Arduino, Boards, Development Boards
Original Arduino Due Board
- A 32-bit core, that allows operations on 4 bytes wide data within a single CPU clock.
- CPU clock at 84Mhz
- 96KBytes of SRAM
- 512KBytes of flash memory for code
- A DMA controller, that can relieve the CPU from doing memory intensive tasks.
SKU: n/a -
Product Carousel Tabs
Display Module, Modules, Modules & Sensors
Arduino UNO 3.5 inch TFT screen
Resistive touch screen TFT LCD, 3.5inch, 480×320 resolution
Standard Arduino interface, compatible with development boards like Arduino UNO, Leonardo, UNO PLUS, NUCLEO, XNUCLEO
Onboard stand-alone touch controller, better touching than solutions that use AD pins directly for touch control
PWM backlight control allows adjusting the backlight to a comfortable level
Micro SD slot, provides an easy way to store photos for displaying
Controlled via SPI, only a few Arduino pins are used
Comes with STM32 and Arduino examples, convenient for porting
SKU: n/a
DuPont / Jumper Wires, Wires
Male to Male Jumper Wires (20cm) – 40 Pieces pack
Compatible with 2.54mm spacing pin headers
40pcs chromatic colour jump wire
High quality and in good working condition
Durable and reusable
Easy to install and use
A popular choice for construction or repair
Be used for the electronic project and Genuine Arduino product
Flexible Breadboard Jumper Cable Wire allows you to plug and unplug easily for prototyping.
SKU: n/a
DuPont / Jumper Wires, Wires
20CM DuPont Wire Color Jumper Cable 2.54mm 1P-1P Female to Female – 40 Pieces Pack
-7%
DuPont / Jumper Wires, Wires
20CM DuPont Wire Color Jumper Cable 2.54mm 1P-1P Female to Female – 40 Pieces Pack
Compatible with 2.54mm spacing pin headers
40pcs chromatic color jump wire
High quality and in good working condition
Durable and reusable
Easy to install and use
A popular choice for construction or repair
Be used for the electronic project and Genuine Arduino product
Flexible Breadboard Jumper Cable Wire allows you to plug and unplug easily for prototyping.
SKU: n/a
DuPont / Jumper Wires, Wires
Male to Female Jumper Wires (20cm) – 40 Pieces pack
Compatible with 2.54mm spacing pin headers
40pcs chromatic colour jump wire
High quality and in good working condition
Durable and reusable
Easy to install and use
A popular choice for construction or repair
Be used for the electronic project and Genuine Arduino product
Flexible Breadboard Jumper Cable Wire allows you to plug and unplug easily for prototyping.
SKU: n/a
Modules
Universal 16 Key Matrix Module Membrane Switch Keypad 4×4
Ultra-thin design & adhesive backing provides easy integration to any project
Excellent price-performance ratio
Easy communication with any microcontroller
5 pins 2.54mm pitch connector, 4x 4type 16 keys.
Sticker can peel off for adhesive mounting.
Operating Voltage (V): 5 DC
SKU: n/a
Relays
12V 4 Channel Relay Module (with Optocoupler) (Copy)
One normally closed contact and one normally open contact
Triode drive, increasing relay coil
High impedance controller pin
Pull-down circuit for the avoidance of malfunction
Power supply indicator and Control indicator lamp
Power supply and relay instructions, lit, the disconnect is off;
The input signal, signal, common Terminal and start conducting;
Useful for appliance control;
DC or AC signal, control, you can control the 220V AC load;
There is a normally open and one normally closed contact;
The module is compliant with international safety standards, control and load areas isolation trenches.
SKU: r1001-1
![[Type 1] Mini Submersible Water Pump Motor One Outlet Nozzle DC 3-6v-Smartiphi-main](https://smartiphi.com/wp-content/uploads/2022/11/Type-1-Mini-Submersible-Water-Pump-Motor-One-Outlet-Nozzle-DC-3-6v-Smartiphi-main-300x300.webp)
![[Type 2] 12V Mini Air Pump Motor for Pet Aquarium Tank (with L Shape Mounting Bracket)-Smartiphi-main](https://smartiphi.com/wp-content/uploads/2022/11/Type-2-12V-Mini-Air-Pump-Motor-for-Pet-Aquarium-Tank-with-L-Shape-Mounting-Bracket-Smartiphi-main-300x300.webp)
![[Type 2] DC Micro Horizontal Upside Nozzle Submersible Water Pump for Fish Tank Fountain Aquarium-Smartiphi-main](https://smartiphi.com/wp-content/uploads/2022/11/Type-2-DC-Micro-Horizontal-Upside-Nozzle-Submersible-Water-Pump-for-Fish-Tank-Fountain-Aquarium-Smartiphi-main-294x300.webp)
![[Type 3] DC Micro Horizontal Two Nozzle Submersible Water Pump for Fish Tank Fountain Aquarium-Smartiphi-main](https://smartiphi.com/wp-content/uploads/2022/11/Type-3-DC-Micro-Horizontal-Two-Nozzle-Submersible-Water-Pump-for-Fish-Tank-Fountain-Aquarium-Smartiphi-main-300x300.webp)
Modules & Sensors, Relays
1 channel Relay 5v
Details:-
The 8550 transistor drive, driveability.
A fixed bolt holes for easy installation.
It has a relay status indicator led Power LED(Green), 8 relay status indicator LED(Red)
Relay control interface by single-chip IO.
Low-level suction close, high-level release.
Easy to use, simple 3 line structure.
SKU: n/a
Relays
12V 4 Channel Relay Module (with Optocoupler)
One normally closed contact and one normally open contact
Triode drive, increasing relay coil
High impedance controller pin
Pull-down circuit for the avoidance of malfunction
Power supply indicator and Control indicator lamp
Power supply and relay instructions, lit, the disconnect is off;
The input signal, signal, common Terminal and start conducting;
Useful for appliance control;
DC or AC signal, control, you can control the 220V AC load;
There is a normally open and one normally closed contact;
The module is compliant with international safety standards, control and load areas isolation trenches.
SKU: r1001
Relays
12V 4 Channel Relay Module (with Optocoupler) (Copy)
One normally closed contact and one normally open contact
Triode drive, increasing relay coil
High impedance controller pin
Pull-down circuit for the avoidance of malfunction
Power supply indicator and Control indicator lamp
Power supply and relay instructions, lit, the disconnect is off;
The input signal, signal, common Terminal and start conducting;
Useful for appliance control;
DC or AC signal, control, you can control the 220V AC load;
There is a normally open and one normally closed contact;
The module is compliant with international safety standards, control and load areas isolation trenches.
SKU: r1001-1
Arduino, Boards, Development Boards
Lilypad 328 Main Board Atmega328P 16M Compatible with Arduino
-8%
Arduino, Boards, Development Boards
Lilypad 328 Main Board Atmega328P 16M Compatible with Arduino
Details:-
Microcontroller: ATmega168 or ATmega328V
Operating Voltage: 2.7-5.5 V
Digital I/O Pins: 14
PWM Channels: 6
Analog Input Channels: 6
DC Current per I/O Pin: 40 mA
Board will run from 2V to 5V.
The latest version of the LilyPad supports automatic reset for even easier programming.
The back side of the LilyPad is now completely flat!
SKU: n/a
Boards, Development Boards, STM
Core Board STM8S103F3P6 STM8 Development Board
Details:-
Chipboard STM32F103C8T6
On board, SWIM interface and reset button
Micro USB line or the 2.54 pin to link to the power with the input voltage 4.5V-15V.
Power light and the Demo indicator light
Leads all the pins and has detailed label for the Pins.
Support SWIM debug mode.
SKU: n/a
Boards, Development Boards, Programmers
TL866II Plus Universal Programmer
Model: TL866II Plus
With Multi-functional ICSP interface
40pin ZIF socket, fully automatic, support fast mode SPI
USB interface for both data transfer and power supply
With over-voltage and over current protection
Supports the serial number of the chips two times development, built-in a variety of commonly used automatic numbering functions
English Language Support
It can program faster than other programmers
SKU: n/a
Audio Modules, Modules
TDA2030A Audio Power Amplifier Module
Details:-
Operating voltage: 6 to 12V DC
Onboard TDA2030A Audio amplifier IC
Mono channel 18W Power amplifier circuit design
Onboard horn socket
10 k adjustable resistance to adjust the volume of the amplification
Onboard power indicator light
Chip has lead to the main pin, can directly input the audio signal
SKU: n/a
DIY Kits, Glue Gun Kits
20 WATT Glue Gun with 5 Glue Sticks 8 inch Long
Comes with Brass Nozzle to retain heat in the most efficient way
Ideal for crafts, home decor, maintenance and more, gun output 60W -100W
The Trigger feed controls the flow of the glue.
Its unique handle grip design makes it easy to use and can be used by anyone or every one.
A glue gun is very useful for sticking everything without getting messy or dirty.
SKU: n/a
Boards, Development Boards, Raspberry Pi
Raspberry Pi 4 Model B with 2 GB RAM Development Board
Details:-
2GB/4GB Varients
Quad-Core 64-bit Broadcom 2711, Cortex A72 Processor
WLAN 802.11 b/g/n/ac (2,4 + 5,0 GHz)
LAN RJ45 10/100/1000 Mbit (Gigabit LAN over USB 3.0)
Operating Power 5V@3A via USB Type-C Port
SKU: n/a
Boards, Development Boards, Teensy
Teensy 3.2 Development Board
Details:-
32 bit ARM Cortex-M4 72 MHz CPU (M4 = DSP extensions)
256K Flash Memory, 64K RAM, 2K EEPROM
21 High-Resolution Analog Inputs (13 bits usable, 16-bit hardware)
1x 12 bit DAC Analog output
34 Digital I/O Pins (16 shared with analog)
12 PWM outputs
7 Timers for intervals/delays, separate from PWM
USB with dedicated DMA memory transfers
3 UARTs (serial ports)
SPI, 2x I2C, I2S, IR modulator
I2S (for the high-quality audio interface)
CAN Bus
Real Time Clock (with user-added 32.768 crystal and battery)
SKU: n/a
AC-DC board & Adaptor, Power Supply
Adapter Power supply 12V 5A with DC Pin
2-Pin adapter
Wide input AC voltage range (100VAC-240VAC).
Very low ripple & noise output for device safety.
High operating ambient temperature up to 80°C.
Highly efficient, compact, durable, and long life.
Protections against- under-over voltage/ overload/ short circuit with auto-restart on fault removal.
SKU: n/a
Modules & Sensors, Sensors, Temp, Humidity & Gas Sensors
DS18B20 Waterproof Temperature Probe
Details:-
Power Supply Range: 3.0V to 5.5V
Adjustable Resolution: 9 – 12
Operating Temperature Range: -55°C to +125°
Cable length: 100 cm
Free iOS and for Android mobile App eWeLink.
Real-time device status provided to App.
SKU: n/a
Free Delivery from ₹999
99% PositiveFeedbacks
OwnKitSmart Brand
Secure Payments
Top Brands
