Smartiphi catalog
Shop electronics components by project need
Browse development boards, DIY kits, sensors, modules, robotics parts, displays, tools and power supplies for learning, lab and prototype work.
Search results: “Arduino”
Showing 1–20 of 109 results
-
Display Module, Modules, Modules & Sensors
Arduino UNO 3.5 inch TFT screen
- Resistive touch screen TFT LCD, 3.5inch, 480×320 resolution
- Standard Arduino interface, compatible with development boards like Arduino UNO, Leonardo, UNO PLUS, NUCLEO, XNUCLEO
- Onboard stand-alone touch controller, better touching than solutions that use AD pins directly for touch control
- PWM backlight control allows adjusting the backlight to a comfortable level
- Micro SD slot, provides an easy way to store photos for displaying
- Controlled via SPI, only a few Arduino pins are used
- Comes with STM32 and Arduino examples, convenient for porting
SKU: n/a -
-
Driver Modules, Drivers, Motors & Drivers
L293D Motor Shield for Arduino
1. Can drive 4 DC motors or 2 stepper motors or 2 Servos
2. 2 interface for 5V Servo connected to the high-resolution dedicated timer no jitter
2. Up to 4 bi-directional DC motors with individual 8-bit speed selection
4. Up to 2 stepper motors with single coil, double coil or interleaved stepping.
5. 4 H-Bridges: per bridge provides 0.6A (1.2A peak current) with thermal protection, can run motors on 4.5V to 36V DCSKU: n/a -
-
Arduino, Boards, Development BoardsDeal
Arduino Mega 2560 R3 Board – Compatible Model High Quality
-24%
Arduino, Boards, Development BoardsArduino Mega 2560 R3 Board – Compatible Model High Quality
- Microcontroller CH340
- Operating Voltage 5V
- Input Voltage (recommended) 7-12V
- Input Voltage (limits) 6-20V
- Digital I/O Pins 54 (of which 15 provide PWM output)
- Analog Input Pins 16
- DC Current per I/O Pin 40 mA
- Dimensions : 111 x 54 x 12 (LxWxH) mm.
SKU: n/a -
Modules & Sensors, Sensors, Temp, Humidity & Gas SensorsDealStock check
HR 202 Humidity Detection Sensor Module For Arduino
-12%
Modules & Sensors, Sensors, Temp, Humidity & Gas SensorsHR 202 Humidity Detection Sensor Module For Arduino
Details:-
- Adjustable Sensitivity, External GND.
- Detect Ambient Humidity.
- Provided with Fixed Bolt Hole, Convenient to Install.
- Power Indicator Light & Digital Output Indication Lamp.
- Using LM393 Chip for Stable Work.
- DO Small Digital Outputs Interface (0 & 1).
- Adjustable Sensitivity, External GND.
- Detect Ambient Humidity.
- Provided with Fixed Bolt Hole, Convenient to Install.
- Power Indicator Light & Digital Output Indication Lamp.
- Using LM393 Chip for Stable Work.
- DO Small Digital Outputs Interface (0 & 1).
SKU: n/a -
Sensors, Sound & Vibration SensorsDeal
Sound Detection Sensor Module Red/Blue for Arduino/RPi/Other Microcontrollers
-59%
Sensors, Sound & Vibration SensorsSound Detection Sensor Module Red/Blue for Arduino/RPi/Other Microcontrollers
Details:-
- Main chip: LM393, Electret condenser microphone
- Working voltage: DC 3.3-5V
- Induction distance is 0.5M
- Signal output Indication
- Single channel signal output
- The output effective signal is low level.
SKU: n/a -
Gas and Dust Sensors, SensorsDealStock check
MQ 135 Air Quality/Gas Detector Sensor Module For Arduino
-11%
Gas and Dust Sensors, SensorsMQ 135 Air Quality/Gas Detector Sensor Module For Arduino
Details:-
- Sensitivity to Ammonia, Sulphide and Benzene steam
- Sensitive for benzene, alcohol, smoke
- Fast response and recovery
- Adjustable sensitivity
- Signal output indicator
- Output voltage boosts along with the concentration of the measured gases increases.
SKU: n/a -
Arduino, Boards, Development Boards
Original Arduino Due Board
- A 32-bit core, that allows operations on 4 bytes wide data within a single CPU clock.
- CPU clock at 84Mhz
- 96KBytes of SRAM
- 512KBytes of flash memory for code
- A DMA controller, that can relieve the CPU from doing memory intensive tasks.
SKU: n/a -
-
Arduino, Boards, Development Boards
Original Arduino Uno Rev3
Details:-
- Arduino Uno REV 3 is an Arduino board based on the microcontroller ATmega328P.
- It comes with 14 digital I/O pins out of which 6 can be used as PWM outputs.
- There are 6 analog input pins and the board’s clock frequency is 16MHz which is used for the synchronization of internal functions.
- Moreover, this board includes a power jack, USB connection, ICSP header, and reset button.
- In fact, it contains almost everything required to support the built-in controller. Simply plug this device with the computer using a USB cable or power it up with an AC-to-DC adopter or battery and start playing with it.
- The operating voltage is 5V while the input voltage ranges from 6 to 20 and the recommended input voltage ranges from 7 to 12V.
SKU: n/a -
Arduino, Boards, Development Boards
Original Arduino Nano
Details:-
- Manufacturer: Arduino Officials
- Operating Voltage (logic level): 5V
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
SKU: n/a -
-
Arduino, Boards, Development Boards, Others, Programmers
Original Arduino Micro
Details:-
- Manufacturer: Arduino Officials
- Support TWI and SPI communication
- Input voltage (recommended) range from 7V to 12V
- Input Voltage (limit) range from 6V to 20V
- 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs)
- Onboard ATmega32u4 microcontroller with 32KB flash memory, 2.5KB SRAM and 1KB EEPROM
SKU: n/a -
-
Boards, Development Boards, ESPDealStock check
Arduino Mega WiFi R3 Atmega2560 NodeMCU ESP8266 32Mb Memory USB-TTL CH340G Compatible For Mega
-17%
Boards, Development Boards, ESPArduino Mega WiFi R3 Atmega2560 NodeMCU ESP8266 32Mb Memory USB-TTL CH340G Compatible For Mega
Details:-
- It is a customized version of the classic ARDUINO MEGA R3 board.
- Full integration of Atmel ATmega2560 microcontroller and ESP8266 Wi-Fi IC, with 32 Mb (megabits) of flash memory, and CH340G USB-TTL converter on a single board!
- All components can be set up to work together or independently.
SKU: n/a -
Arduino, Boards, Development Boards
Arduino UNO R3 SMD Atmega328P Board
Details:-
- Microcontroller ATmega328 (SMD) – Interface CH340G
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 5-20V
- Digital I / O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
SKU: n/a -
Development Kits, DIY Kits
Arduino Nano Development Kit – Beginner Series
Details:-
- Great development kit to get started in the DIY world of DIY electronics, IOT and embedded systems.
- The Kit includes Arduino Nano, LCD, SG-90 Servo motor and various other sensors and
actuators to get you started. - Comes in durable box
SKU: n/a
