Skip to content

Arduino UNO 3.5 inch TFT screen

  • Resistive touch screen TFT LCD, 3.5inch, 480×320 resolution
  • Standard Arduino interface, compatible with development boards like Arduino UNO, Leonardo, UNO PLUS, NUCLEO, XNUCLEO
  • Onboard stand-alone touch controller, better touching than solutions that use AD pins directly for touch control
  • PWM backlight control allows adjusting the backlight to a comfortable level
  • Micro SD slot, provides an easy way to store photos for displaying
  • Controlled via SPI, only a few Arduino pins are used
  • Comes with STM32 and Arduino examples, convenient for porting
Read More
Leave a comment

L293D Motor Shield for Arduino

1. Can drive 4 DC motors or 2 stepper motors or 2 Servos
2. 2 interface for 5V Servo connected to the high-resolution dedicated timer no jitter
2. Up to 4 bi-directional DC motors with individual 8-bit speed selection
4. Up to 2 stepper motors with single coil, double coil or interleaved stepping.
5. 4 H-Bridges: per bridge provides 0.6A (1.2A peak current) with thermal protection, can run motors on 4.5V to 36V DC

Read More
Leave a comment
HR 202 Humidity Detection Sensor Module For Arduino-Smartiphi-main

HR 202 Humidity Detection Sensor Module For Arduino

Details:-

  1. Adjustable Sensitivity, External GND.
  2. Detect Ambient Humidity.
  3. Provided with Fixed Bolt Hole, Convenient to Install.
  4. Power Indicator Light & Digital Output Indication Lamp.
  5. Using LM393 Chip for Stable Work.
  6. DO Small Digital Outputs Interface (0 & 1).
  7. Adjustable Sensitivity, External GND.
  8. Detect Ambient Humidity.
  9. Provided with Fixed Bolt Hole, Convenient to Install.
  10. Power Indicator Light & Digital Output Indication Lamp.
  11. Using LM393 Chip for Stable Work.
  12. DO Small Digital Outputs Interface (0 & 1).
Read More
Leave a comment
Original Arduino Due Board-Smartiphi-Main

Original Arduino Due Board

  1. A 32-bit core, that allows operations on 4 bytes wide data within a single CPU clock.
  2. CPU clock at 84Mhz
  3. 96KBytes of SRAM
  4. 512KBytes of flash memory for code
  5. A DMA controller, that can relieve the CPU from doing memory intensive tasks.
Read More
Leave a comment
Original Arduino Uno Rev3-Smartiphi-Main

Original Arduino Uno Rev3

Details:-

  1. Arduino Uno REV 3 is an Arduino board based on the microcontroller ATmega328P.
  2. It comes with 14 digital I/O pins out of which 6 can be used as PWM outputs.
  3. There are 6 analog input pins and the board’s clock frequency is 16MHz which is used for the synchronization of internal functions.
  4. Moreover, this board includes a power jack, USB connection, ICSP header, and reset button.
  5. In fact, it contains almost everything required to support the built-in controller. Simply plug this device with the computer using a USB cable or power it up with an AC-to-DC adopter or battery and start playing with it.
  6. The operating voltage is 5V while the input voltage ranges from 6 to 20 and the recommended input voltage ranges from 7 to 12V.
Read More
Leave a comment
Original Arduino Nano-Smartiphi-Main

Original Arduino Nano

Details:-

  1. Manufacturer: Arduino Officials
  2. Operating Voltage (logic level): 5V
  3. 8 analog inputs ports: A0 ~ A7
  4. 14 Digital input / output ports: TX, RX, D2 ~ D13
  5. 1 pair of TTL level serial transceiver ports RX / TX
  6. Using Atmel Atmega328P-AU MCU
  7. There is a bootloader installed in it
  8. Standard 0.1” spacing DIP (breadboard friendly).
  9. Manual reset switch.
Read More
Leave a comment
Original Arduino Micro-Smartiphi-MAIN

Original Arduino Micro

Details:-

  1. Manufacturer: Arduino Officials
  2. Support TWI and SPI communication
  3. Input voltage (recommended) range from 7V to 12V
  4. Input Voltage (limit) range from 6V to 20V
  5. 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs)
  6. Onboard ATmega32u4 microcontroller with 32KB flash memory, 2.5KB SRAM and 1KB EEPROM
Read More
Leave a comment

Brands Carousel

Smartiphi

Electronics components, kits, modules and project support for makers, students, schools, labs and engineering teams.

+91 995 837 5444
[email protected]
Smartiphi Solutions Pvt Ltd, G202, DLF New Town Heights, Sector 86, Gurgaon 122004.

SHOPPING CART

close