Details:-
- 12-bit resolution
- Small package
- 2.7V to 5.5V supply
- Internal EEPROM to store settings
- I2C Interface (Standard, Fast, and High-Speed supported)
TCS3200/TCS230 Color Sensor Module
Details:-
- Operating Voltage: 3V-5V
- High-resolution conversion of light intensity to frequency.
- Chip pins all has drawn for standard 100.
- Put the needle (2.54 mm).
- Mil-convenient for bitmap board.
- Programmable color and full-scale output frequency.
- Communicate directly with a microcontroller.
- Low-profile surface mount package.
Analog TDS Sensor Water for Water Conductivity
- Wide voltage operation: 3.3~5.5V
- 0~2.3V analog signal output, compatible with 5V, 3.3V two control systems
- The excitation source is an AC signal, effectively preventing probe polarization
- Waterproof probe for long-term immersion in water
- Arduino compatible, easy to connect, plug and play, no soldering required
R307 Fingerprint Identification Biometric Module
This sensor makes fingerprint detection and verification super simple to implement with Arduino, Raspberry Pi and other microcontrollers. This is the updated latest model of the R305 FingerPrint Sensor. It
AB147 Turbidity Sensor with Module
Details:-
- Operating Voltage: 5VDC.
- Current: 30mA (MAX).
- Operating temperature: -30 ° C to 80 ° C.
- Compatible with Arduino, Raspberry Pi, AVR, PIC, etc.
- Measuring Range: 0 ~ 1000 NTU.
RFID Reader/Writer with RFID Card and Tag RC522AC
RC522 – RFID Reader / Writer 13.56MHz with Cards Kit includes a 13.56MHz RF reader cum writer module that uses an RC522 IC and two S50 RFID cards. The MF
Force Sensitive Resistor Square
This is a force sensitive resistor with a square, 1.75 x 1.5″, sensing area. This FSR will vary its resistance depending on how much pressure is being applied to the
MLX90614 Non-Contact Infrared Temperature Sensor GY-906
MLX90614 is an infrared thermometer designed for non-contact temperature sensing. An internal 17-bit ADC and a powerful DSP contribute to the MLX90614’s high accuracy and resolution. It has a huge
TTP226 – 8 Channel Capacitive Touch Sensor Module
TTP226 8-Channel Capacitive Touch Switch Sensor Module uses the touch-sensing IC TTP226 to sense the touch input thus making it easy to add capacitive touch input to your project. The
QMC5883L Magnetic Sensor Module (GY-271 Module)
QMC5883L is a multi-chip 3-axis magnetic sensor compatible with HMC5883L. Targeted for high precision applications such as compassing, navigation in drone, robot, mobile and hobby purpose applications.This triple axis compass
Micro Load Cell (Weight Sensor) with 3kg Capacity
This Load cell can be used to measure the weight of objects between 0 and 3kg. This straight bar load cell (sometimes called a strain gauge) can translate up to
Voltage Detection Sensor Module 25V
Details:-
- You can also use the IICLCD1602 LCD to display voltage.
- By 3P connector, connect this module with the expansion of board Arduino
- Voltage input range: DC 0-25 V
- Voltage detection range: DC 0.02445 V to 25 V
- Voltage analog resolution : 0.00489 V
YF-S201 Water Flow Sensor
Details:-
- Working Voltage: 5 to 18V DC (min tested working voltage 4.5V).
- Max current draw: 15mA @ 5V.
- Working Flow Rate: 1 to 30 Liters/Minute.
- Maximum water pressure: 2.0 MPa.
- Flow rate pulse characteristics: Frequency (Hz) = 7.5 * Flow rate (L/min).
MQ7 – Carbon Monoxide Gas Sensor Module
Details:-
- Operating voltage: DC 5 V.
- The analog output voltage, the higher the concentration the higher the voltage.
- The carbon monoxide detection with better sensitivity.
- With a long service life and reliable stability.
- Rapid response and recovery characteristics.
- Range: 10 to 1000 ppm.
ESP-01 ESP8266 Development Module
- 802.11 b/g/n Standards
- Wi-Fi Direct (P2P), soft-AP
- 1MB Flash Memory
- Integrated low power 32-bit CPU could be used as an application processor
- A-MPDU & A-MSDU aggregation & 0.4ms guard interval
- Wake up and transmit packets in < 2ms
- Standby power consumption of < 1.0mW (DTIM3)
WeMos D1 Mini Development board
- 11 digital input/output pins
- Interrupt/PWM/I2C/one-wire
- 1 analog input(3.2V max input)
- 16M bytes(128M bit) Flash
- External antenna connector
- Built-in ceramic antenna
- New CP2104 USB-TO-UART IC
WeMos D1 R2 WiFi ESP8266 Development Board
Details:-
- This is WeMos ESP8266 D1 R2 V2.1.0 WiFi Development Board. The WeMos D1 is an ESP8266 WiFi based board that uses the Arduino layout with an operating voltage of 3.3V.
- The board is controlled by the ESP8266 chip (a 32-Bit processor) and has a larger flash memory compared to an Arduino Uno. It consists of 11 digital I/O pins and 1 analog (input) pin. the board can be connected using a Micro-B type USB cable.
- The D1 R2 is a WiFi capable ESP8266EX based development board in the form of the Arduino UNO board format. This board is compatible with the Arduino IDE and with NodeMCU.
- The D1 R2 also features an onboard switching power supply which allows you to power the board from a power supply up to 12V.
ESP8266 NodeMCU CP2102
Details:-
- Open-source, Interactive, Programmable, Low cost, Simple, Smart, WI-FI enabled
- Arduino-like hardware IO
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLL, regulators, DCXO and power management units
- Onboard USB to serial chip to easily program and upload codes from the Arduino IDE
- Embeds logic level converter circuits
- Has onboard 3.3V regulator to ensure enough power to function as your go-to WiFi chip!
- Easy access to the GPIO pins for easy prototyping
- ESP-12E Processor
- Easy to use breadboard friendly form factor
MAX30102 Pulse Oximeter Heart Rate Sensor Module
Details:-
- LED peak wavelength: 660nm/880nm
- LED power supply voltage: 3.3~5V
- Detection signal type: light reflection signal (PPG)
- Output signal interface: I2C interface
Dual Axis XY Joystick Module
Details:-
A small Dual-axis XY Joystick Module for Arduino on a PCB for convenient access.
