Development Boards
Showing 61–77 of 77 results
-
-
Boards, Development Boards, STM
STMICROELECTRONICS NUCLEO-F042K6 Development
Details :-
- Product: NUCLEO-F042K6 Development Board
- Extension with Arduino™ nano connectivity
- On-board ST-LINK/V2-1 debugger/programmer with SWD connector – USB VBUS, external source
- USB communication (LD1), power LED (LD2), user LED (LD3)
SKU: n/a -
Boards, Development Boards, STM
STMicroelectronics STM32L0538-DISCO Development Board
Details :-
- Product: STM32L0538-DISCO Development Board
- STM32L053C8T6 ARM 32bit Cortex-M0+ with MPU
- USB re-enumeration capability with three different interfaces supported on the USB
- Board power supply through USB bus or from an external 5V supply voltage
SKU: n/a -
Boards, Development Boards, Teensy
Teensy 3.2 Development Board
Details:-
- 32 bit ARM Cortex-M4 72 MHz CPU (M4 = DSP extensions)
- 256K Flash Memory, 64K RAM, 2K EEPROM
- 21 High-Resolution Analog Inputs (13 bits usable, 16-bit hardware)
- 1x 12 bit DAC Analog output
- 34 Digital I/O Pins (16 shared with analog)
- 12 PWM outputs
- 7 Timers for intervals/delays, separate from PWM
- USB with dedicated DMA memory transfers
- 3 UARTs (serial ports)
- SPI, 2x I2C, I2S, IR modulator
- I2S (for the high-quality audio interface)
- CAN Bus
- Real Time Clock (with user-added 32.768 crystal and battery)
SKU: n/a -
Boards, Development Boards, Teensy
Teensy 3.5 Development Board
Details:-
- 120MHz ARM Cortex-M4 with Floating Point Unit
- 512K Flash, 192K RAM, 4K EEPROM
- Microcontroller Chip MK64FX512VMD12
- 1 CAN Bus Port
- 16 General Purpose DMA Channels
- 5V Tolerance on All Digital I/O Pins
- 62 I/O Pins (42 breadboards friendly)
- 25 Analog Inputs to 2 ADC with 13-bit resolution
- 2 Analog Outputs (DAC) with 12-bit resolution
- 20 PWM Outputs (Teensy 3.6 has 22 PWM)
- USB Full Speed (12Mbit/sec) Port
- Ethernet mac, capable of full 100Mbit/sec speed
- Native (4-bit SDIO) micro SD card port
SKU: n/a -
Boards, Development Boards, STM, Teensy
Teensy 3.6 Development Board
Details:-
- 180 MHz ARM Cortex-M4 with Floating Point Unit
- 1M Flash, 256K RAM, 4K EEPROM
- Microcontroller Chip MK66FX1M0VMD18
- USB High Speed (480Mbit/sec) Port
- 2 CAN Bus Ports
- 32 General Purpose DMA Channels
- 22 PWM Outputs
- 4 I2C Ports
- 11 Touch-Sensing Inputs
- 62 I/O Pins (42 breadboards friendly)
SKU: n/a -
-
-
Development Boards, Teensy
Teensy LC USB Micro-controller Development Board
Details:-
- 32 bit ARM Cortex-M0+ 48 MHz CPU
- 62kB Flash Memory, 8kB RAM, 1/8(emu)kB EEPROM
- 13 High-Resolution Analog Inputs
- 27 Digital I/O Pins (NOT 5V Tolerant)
- 10 PWM outputs
- 7 Timers for intervals/delays, separate from PWM
- 3 UARTs (serial ports)
- SPI, I2C, I2S
- I2S (for the high-quality audio interface)
SKU: n/a -
Boards, Development Boards, Programmers
TL866II Plus Universal Programmer
- Model: TL866II Plus
- With Multi-functional ICSP interface
- 40pin ZIF socket, fully automatic, support fast mode SPI
- USB interface for both data transfer and power supply
- With over-voltage and over current protection
- Supports the serial number of the chips two times development, built-in a variety of commonly used automatic numbering functions
- English Language Support
- It can program faster than other programmers
SKU: n/a -
-
Development Boards, Shields
UNO Self Adhesive Prototype Shield with SYB-170 Mini Breadboard
- It has a nice standard 0.1″x0.1″ prototyping grid with big pads
- Comes with Stacking headers and plain header, choose whichever you want when soldering together
- An IC pattern for adding DIP ICs up to 20 pins
- Power rails down the middle and sides
- A reset button and an extra general use button
- Two 3mm general use LEDs, red and green, as well as 2 matching resistors
SKU: n/a -
Development Boards, Programmers
USB ISP Programmer Version 2.0
- The USB Firmware Loader USBasp Programmer for KK multicopter Board KK board AVR USBasp ISP + 6 pin adapter.
- The USB Firmware Loader / Programmer (USB ASPa) is the hardware utility.
- You can use it to change the flying mode of a KK multicopter board by re-programming the internal flash of the board.
SKU: n/a -
-
Boards, Development Boards, ESP
WeMos D1 R2 WiFi ESP8266 Development Board
Details:-
- This is WeMos ESP8266 D1 R2 V2.1.0 WiFi Development Board. The WeMos D1 is an ESP8266 WiFi based board that uses the Arduino layout with an operating voltage of 3.3V.
- The board is controlled by the ESP8266 chip (a 32-Bit processor) and has a larger flash memory compared to an Arduino Uno. It consists of 11 digital I/O pins and 1 analog (input) pin. the board can be connected using a Micro-B type USB cable.
- The D1 R2 is a WiFi capable ESP8266EX based development board in the form of the Arduino UNO board format. This board is compatible with the Arduino IDE and with NodeMCU.
- The D1 R2 also features an onboard switching power supply which allows you to power the board from a power supply up to 12V.
SKU: n/a
