Smartiphi catalog
Shop electronics components by project need
Browse development boards, DIY kits, sensors, modules, robotics parts, displays, tools and power supplies for learning, lab and prototype work.
Shop
Showing 121–140 of 386 results
-
Arduino, Boards, Development Boards
Arduino UNO R3 SMD Atmega328P Board
Details:-
- Microcontroller ATmega328 (SMD) – Interface CH340G
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 5-20V
- Digital I / O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
SKU: n/a -
-
Modules & Sensors, Sensors, Weight, Force & Pressure SensorsDealStock check
BMP280 Barometric Pressure and Altitude Sensor I2C/SPI Module
-22%
Modules & Sensors, Sensors, Weight, Force & Pressure SensorsBMP280 Barometric Pressure and Altitude Sensor I2C/SPI Module
Details:-
- Operating Voltage: 1.71V to 3.6V – would typically be operated from 3.3V.
- Operating Temperature: -40 to +85 deg. Celsius (full accuracy between 0 and +65 deg. C).
- Peak current: 1.12mA.
- Operating Pressure: 300 hPa to 1100 hPa.
- Accuracy between 700 to 900hPa and 25 to 40 deg. C: ±0.12hPa and ±1.0m.
SKU: n/a -
BO Motors, Motors
BO Motor Dual Shaft – Straight
- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- The relatively low coefficient of friction.
- Operating Voltage(VDC): 3~6
- Shaft Length (mm): 8.5
- Shaft Diameter (mm): 5.5 (Double D-type)
- No Load Current: 40-180mA.
- Rated Speed(After Reduction): 150 RPM
- Rated Torque: 0.35 Kgcm
SKU: n/a -
BO Motors, Motors
BO Motor Single Shaft Straight 150 RPM
- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- The relatively low coefficient of friction.
- Operating Voltage(VDC): 3~6
- Shaft Length (mm): 8.5
- Shaft Diameter (mm): 5.5 (Double D-type)
- No Load Current: 40-180mA.
- Rated Speed(After Reduction): 150 RPM
- Rated Torque: 0.35 Kgcm
SKU: n/a -
-
Breadboard & PCBs, Electronic Components
Breadboard 830 Points for Solderless Prototyping
- Mb102 Bread Board
- 830 Solder-less Points
- Ideal for Experimenting With Circuit Design In Labs
- Compatible with resistance, diodes, transistors, LED’s, Capacitors and other types of electronic components
- Colored coordinates for easy components placement.
- Accept a variety of wire sizes 20-29 AWG
SKU: n/a -
Modules, Power Supply Boards
Breadboard Power Supply Module 3.3V/5V
- Breadboard power supply module, compatible with 5V, 3.3V.
- Apply to MB102 breadboard
- Input voltage: 6.5-12 V (DC) or USB power supply
- Output voltage: 3.3V/5V can switch over
- Maximum output current: <700 ma
- Fluctuation two road independent control can switch over to 0 V, 3.3 V, 5 V
- On-board two groups of 3.3V, 5V DC output plug pin, convenient external lead use.
SKU: n/a -
-
Modules, Modules & SensorsDeal
CD74HC4067 16-Channel Analog/Digital Multiplexer Breakout Board Module
-44%
Modules, Modules & SensorsCD74HC4067 16-Channel Analog/Digital Multiplexer Breakout Board Module
Details:
- CD74HC4067 High Speed CMOS 16-Channel Analog/Digital Multiplexer Breakout Module
- 2V To 6V operation
- “On” resistance: 70 Ohms @ 4.5V
- 6ns break-before-make @ 4.5V
- Wide operating temperature range: -55 ~ 125°C
SKU: n/a -
Development Boards, Programmers
CH341A 24 25 Series Burner Chip EEPROM
- USB interface
- With CH341A chip
- Support 24 EEPROM and 25 SPI flash 8pin or 16pin chip
- With 24/25 status indicator lamp
- Support USB to TTL conversionSupport 24EEPROM and 25 SPI flash 8pin/ 16pin chip
- Recognize 25 series chip automatically
- Supports download STC series procedure of single chip
- SPI pin to support expanding the utility
- STC microcontroller supports a full range of program download
- Support expanding the utility by SPI pin
- With SOP8 SOP16 to DIP8 converter board
SKU: n/a
