Smartiphi catalog
Shop electronics components by project need
Browse development boards, DIY kits, sensors, modules, robotics parts, displays, tools and power supplies for learning, lab and prototype work.
Shop
Showing 341–360 of 386 results
-
Boards, Development Boards, STMDealStock check
STMicroelectronics STM32L0538-DISCO Development Board
-9%
Boards, Development Boards, STMSTMicroelectronics STM32L0538-DISCO Development Board
Details :-
- Product: STM32L0538-DISCO Development Board
- STM32L053C8T6 ARM 32bit Cortex-M0+ with MPU
- USB re-enumeration capability with three different interfaces supported on the USB
- Board power supply through USB bus or from an external 5V supply voltage
SKU: n/a -
Sensors, Sound & Vibration Sensors
SW-420 Vibration Sensor Module
Details:-
- Using SW-420 normally closed type vibration sensor
- Comparator output, clean signal, good waveform, strong driving ability, >15mA
- Operating voltage 3.3V ~ 5V
- Output format: digital switching output (0 and 1)
- Using a wide voltage LM393 comparator
- With bolt holes for easy installation
SKU: n/a -
Light, Color & Line Sensors, Modules & Sensors, Sensors
TCS3200/TCS230 Color Sensor Module
Details:-
- Operating Voltage: 3V-5V
- High-resolution conversion of light intensity to frequency.
- Chip pins all has drawn for standard 100.
- Put the needle (2.54 mm).
- Mil-convenient for bitmap board.
- Programmable color and full-scale output frequency.
- Communicate directly with a microcontroller.
- Low-profile surface mount package.
SKU: n/a -
Audio Modules, Modules
TDA2030A Audio Power Amplifier Module
Details:-
- Operating voltage: 6 to 12V DC
- Onboard TDA2030A Audio amplifier IC
- Mono channel 18W Power amplifier circuit design
- Onboard horn socket
- 10 k adjustable resistance to adjust the volume of the amplification
- Onboard power indicator light
- Chip has lead to the main pin, can directly input the audio signal
SKU: n/a -
Boards, Development Boards, Teensy
Teensy 3.2 Development Board
Details:-
- 32 bit ARM Cortex-M4 72 MHz CPU (M4 = DSP extensions)
- 256K Flash Memory, 64K RAM, 2K EEPROM
- 21 High-Resolution Analog Inputs (13 bits usable, 16-bit hardware)
- 1x 12 bit DAC Analog output
- 34 Digital I/O Pins (16 shared with analog)
- 12 PWM outputs
- 7 Timers for intervals/delays, separate from PWM
- USB with dedicated DMA memory transfers
- 3 UARTs (serial ports)
- SPI, 2x I2C, I2S, IR modulator
- I2S (for the high-quality audio interface)
- CAN Bus
- Real Time Clock (with user-added 32.768 crystal and battery)
SKU: n/a -
Boards, Development Boards, Teensy
Teensy 3.5 Development Board
Details:-
- 120MHz ARM Cortex-M4 with Floating Point Unit
- 512K Flash, 192K RAM, 4K EEPROM
- Microcontroller Chip MK64FX512VMD12
- 1 CAN Bus Port
- 16 General Purpose DMA Channels
- 5V Tolerance on All Digital I/O Pins
- 62 I/O Pins (42 breadboards friendly)
- 25 Analog Inputs to 2 ADC with 13-bit resolution
- 2 Analog Outputs (DAC) with 12-bit resolution
- 20 PWM Outputs (Teensy 3.6 has 22 PWM)
- USB Full Speed (12Mbit/sec) Port
- Ethernet mac, capable of full 100Mbit/sec speed
- Native (4-bit SDIO) micro SD card port
SKU: n/a -
Boards, Development Boards, STM, Teensy
Teensy 3.6 Development Board
Details:-
- 180 MHz ARM Cortex-M4 with Floating Point Unit
- 1M Flash, 256K RAM, 4K EEPROM
- Microcontroller Chip MK66FX1M0VMD18
- USB High Speed (480Mbit/sec) Port
- 2 CAN Bus Ports
- 32 General Purpose DMA Channels
- 22 PWM Outputs
- 4 I2C Ports
- 11 Touch-Sensing Inputs
- 62 I/O Pins (42 breadboards friendly)
SKU: n/a -
-
-
Development Boards, Teensy
Teensy LC USB Micro-controller Development Board
Details:-
- 32 bit ARM Cortex-M0+ 48 MHz CPU
- 62kB Flash Memory, 8kB RAM, 1/8(emu)kB EEPROM
- 13 High-Resolution Analog Inputs
- 27 Digital I/O Pins (NOT 5V Tolerant)
- 10 PWM outputs
- 7 Timers for intervals/delays, separate from PWM
- 3 UARTs (serial ports)
- SPI, I2C, I2S
- I2S (for the high-quality audio interface)
SKU: n/a -
Modules & Sensors, Sensors, Temp, Humidity & Gas SensorsDealStock check
Thermistor Temperature Sensor NTC100K
-15%
Modules & Sensors, Sensors, Temp, Humidity & Gas SensorsThermistor Temperature Sensor NTC100K
Details:-
- Temperature range of use: −40°C to 270°C.
- Dissipation power factor: ≥5 mW/℃ (static in the air).
- 100k Ohm NTC Thermistor.
- NTC Thin Film Thermistor Cable.
- Max power rating: 45 mW
- The hot time constant: ≤7 s(in the air)
SKU: n/a -
Modules, RelaysDeal
Timer Relay DC 6-30V 1-Channel Power Relay Module with Adjustable Timing Cycle
-20%
Modules, RelaysTimer Relay DC 6-30V 1-Channel Power Relay Module with Adjustable Timing Cycle
Details:-
- Operating voltage: 6-30V
- Time interval:0.1 s (minimum) ~ 999 min (maximum) continuously adjustable.
- Trigger Signal Source: High-Level Trigger (3.0 V-24 V)
- Output Capacity: can control no more than DC 30V 5A AC or 220 V devices 5A
- Optocoupler Isolation.
SKU: n/a -
Boards, Development Boards, Programmers
TL866II Plus Universal Programmer
- Model: TL866II Plus
- With Multi-functional ICSP interface
- 40pin ZIF socket, fully automatic, support fast mode SPI
- USB interface for both data transfer and power supply
- With over-voltage and over current protection
- Supports the serial number of the chips two times development, built-in a variety of commonly used automatic numbering functions
- English Language Support
- It can program faster than other programmers
SKU: n/a -
-
BMS, Modules, Power Management ModulesDeal
TP4056 (Mini USB with Current Protection) 1A Li-ion Lithium Battery Charging Module
-26%
BMS, Modules, Power Management ModulesTP4056 (Mini USB with Current Protection) 1A Li-ion Lithium Battery Charging Module
- Input voltage : 4.5V ~ 5.5V.
- Input Interface: Micro USB port.
- Charging method: linear charge.
- A full charge voltage: 4.2V.
- Power: 4.2 w.
- Charging accuracy: 1.5%.
- Operating Temperature: -10 to +85ºC
- Charging indicator: LED indicators for charging and full charging.
SKU: n/a -
