Development Board
Showing 21–40 of 40 results
-
Boards, Development Boards, Raspberry Pi
Raspberry Pi Pico Development Board
Details:-
- RP2040 microcontroller chip designed by Raspberry Pi
- Dual-core Arm Cortex M0+ processor, the flexible clock running up to 133 MHz
- 264KB of SRAM, and 2MB of onboard Flash memory
- 26 × multi-function GPIO pins
- 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels
- Onboard temperature sensor
SKU: n/a -
Boards, Development Boards, Raspberry Pi
Raspberry Pi Pico W Development Board
Details:-
- RP2040 microcontroller with 2MB of flash memory
- On-board single-band 2.4GHz wireless interfaces (802.11n)
- Micro USB B port for power and data (and for reprogramming the flash)
- 40 pin 21mmx51mm ‘DIP’ style 1mm thick PCB
- Exposes 26 multi-function 3.3V general purpose I/O (GPIO)
- 23 GPIO are digital-only, with three also being ADC capable
SKU: n/a -
-
Boards, Development Boards, Raspberry Pi
Raspberry Pi zero Development Board
Details:-
- The Raspberry Pi Zero v1.3 is super low cost and smaller than it’s bigger brother, the Raspberry Pi 3.
- The Raspberry Pi Zero v1.3 now comes complete with a camera port. Using the new Raspberry Pi Zero Camera.
- Adapter, you can now connect a Raspberry Pi camera to your Zero
HAT Compatibility:
- The Pi Zero is fully compatible with all HAT breakout boards, as it features the same 40 Pin GPIO as the Raspberry Pi 2/B+/A+
SKU: n/a -
-
-
-
-
-
Boards, Development Boards, STM
STMICROELECTRONICS NUCLEO-F042K6 Development
Details :-
- Product: NUCLEO-F042K6 Development Board
- Extension with Arduino™ nano connectivity
- On-board ST-LINK/V2-1 debugger/programmer with SWD connector – USB VBUS, external source
- USB communication (LD1), power LED (LD2), user LED (LD3)
SKU: n/a -
Boards, Development Boards, STM
STMicroelectronics STM32L0538-DISCO Development Board
Details :-
- Product: STM32L0538-DISCO Development Board
- STM32L053C8T6 ARM 32bit Cortex-M0+ with MPU
- USB re-enumeration capability with three different interfaces supported on the USB
- Board power supply through USB bus or from an external 5V supply voltage
SKU: n/a -
Boards, Development Boards, Teensy
Teensy 3.2 Development Board
Details:-
- 32 bit ARM Cortex-M4 72 MHz CPU (M4 = DSP extensions)
- 256K Flash Memory, 64K RAM, 2K EEPROM
- 21 High-Resolution Analog Inputs (13 bits usable, 16-bit hardware)
- 1x 12 bit DAC Analog output
- 34 Digital I/O Pins (16 shared with analog)
- 12 PWM outputs
- 7 Timers for intervals/delays, separate from PWM
- USB with dedicated DMA memory transfers
- 3 UARTs (serial ports)
- SPI, 2x I2C, I2S, IR modulator
- I2S (for the high-quality audio interface)
- CAN Bus
- Real Time Clock (with user-added 32.768 crystal and battery)
SKU: n/a -
Boards, Development Boards, Teensy
Teensy 3.5 Development Board
Details:-
- 120MHz ARM Cortex-M4 with Floating Point Unit
- 512K Flash, 192K RAM, 4K EEPROM
- Microcontroller Chip MK64FX512VMD12
- 1 CAN Bus Port
- 16 General Purpose DMA Channels
- 5V Tolerance on All Digital I/O Pins
- 62 I/O Pins (42 breadboards friendly)
- 25 Analog Inputs to 2 ADC with 13-bit resolution
- 2 Analog Outputs (DAC) with 12-bit resolution
- 20 PWM Outputs (Teensy 3.6 has 22 PWM)
- USB Full Speed (12Mbit/sec) Port
- Ethernet mac, capable of full 100Mbit/sec speed
- Native (4-bit SDIO) micro SD card port
SKU: n/a -
-
-
Development Boards, Teensy
Teensy LC USB Micro-controller Development Board
Details:-
- 32 bit ARM Cortex-M0+ 48 MHz CPU
- 62kB Flash Memory, 8kB RAM, 1/8(emu)kB EEPROM
- 13 High-Resolution Analog Inputs
- 27 Digital I/O Pins (NOT 5V Tolerant)
- 10 PWM outputs
- 7 Timers for intervals/delays, separate from PWM
- 3 UARTs (serial ports)
- SPI, I2C, I2S
- I2S (for the high-quality audio interface)
SKU: n/a -
Boards, Development Boards, ESP
WeMos D1 R2 WiFi ESP8266 Development Board
Details:-
- This is WeMos ESP8266 D1 R2 V2.1.0 WiFi Development Board. The WeMos D1 is an ESP8266 WiFi based board that uses the Arduino layout with an operating voltage of 3.3V.
- The board is controlled by the ESP8266 chip (a 32-Bit processor) and has a larger flash memory compared to an Arduino Uno. It consists of 11 digital I/O pins and 1 analog (input) pin. the board can be connected using a Micro-B type USB cable.
- The D1 R2 is a WiFi capable ESP8266EX based development board in the form of the Arduino UNO board format. This board is compatible with the Arduino IDE and with NodeMCU.
- The D1 R2 also features an onboard switching power supply which allows you to power the board from a power supply up to 12V.
SKU: n/a
