Development Boards
Showing 21–40 of 77 results
-
Boards, Development Boards, ESP
NodeMCU ESP8266 V3 Lua CH340 Development Board
- Built-in Micro-USB, with flash and reset switches, easy to program
- Wireless 802.11 supported, direct download no need to reset
- Arduino compatible works great with the latest Arduino IDE/Mongoose IoT/Micropython
- WiFi at 2.4GHz, support WPA / WPA2 security mode
- Supports GPIO, PWM, I2C, SPI, UART and ADC.
SKU: Sm-1001 -
Boards, Development Boards, Nvidia
NVIDIA Jetson AGX Xavier 8GB Module
- Product: Jetson AGX Xavier 8GB Module
- GPU: 384-Core Volta GPU with 48 Tensor cores 5.5 TFLOPS (FP16) | 11.1 TOPS (INT8)
- CPU:6-core Carmel ARM v8.2 64-bit CPU, 6MB L2 + 4MB L3
- Memory: 8GB 256-bit LPDDR4x | 1333MHz – 85GB/s
- Storage: 32GB eMMC 5.1
- Size: 100 mm x 87 mm
SKU: n/a -
-
Boards, Development Boards, Nvidia
NVIDIA Jetson TX2 4GB Module
Details:-
- Product: Jetson TX2 4GB Module
- AI Performance: 1.33 TFLOPs
- GPU: 256-core NVIDIA Pascal™ GPU
- CPU: Dual-Core NVIDIA Denver 2 64-Bit CPU and Quad-Core ARM® Cortex®-A57 MPCore processor
- Memory: 4 GB 128-bit LPDDR4, 51.2GB/s
- Storage: 16 GB eMMC 5.1
SKU: n/a -
Arduino, Boards, Development Boards
Original Arduino Due Board
- A 32-bit core, that allows operations on 4 bytes wide data within a single CPU clock.
- CPU clock at 84Mhz
- 96KBytes of SRAM
- 512KBytes of flash memory for code
- A DMA controller, that can relieve the CPU from doing memory intensive tasks.
SKU: n/a -
-
Arduino, Boards, Development Boards, Others, Programmers
Original Arduino Micro
Details:-
- Manufacturer: Arduino Officials
- Support TWI and SPI communication
- Input voltage (recommended) range from 7V to 12V
- Input Voltage (limit) range from 6V to 20V
- 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs)
- Onboard ATmega32u4 microcontroller with 32KB flash memory, 2.5KB SRAM and 1KB EEPROM
SKU: n/a -
-
Arduino, Boards, Development Boards
Original Arduino Nano
Details:-
- Manufacturer: Arduino Officials
- Operating Voltage (logic level): 5V
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
SKU: n/a -
Arduino, Boards, Development Boards
Original Arduino Uno Rev3
Details:-
- Arduino Uno REV 3 is an Arduino board based on the microcontroller ATmega328P.
- It comes with 14 digital I/O pins out of which 6 can be used as PWM outputs.
- There are 6 analog input pins and the board’s clock frequency is 16MHz which is used for the synchronization of internal functions.
- Moreover, this board includes a power jack, USB connection, ICSP header, and reset button.
- In fact, it contains almost everything required to support the built-in controller. Simply plug this device with the computer using a USB cable or power it up with an AC-to-DC adopter or battery and start playing with it.
- The operating voltage is 5V while the input voltage ranges from 6 to 20 and the recommended input voltage ranges from 7 to 12V.
SKU: n/a -
Arduino, Boards, Development Boards
Original: Arduino UNO R3 DIP Development Board with ATmega328a
-6%
Arduino, Boards, Development BoardsOriginal: Arduino UNO R3 DIP Development Board with ATmega328a
Details:-
- Micro-controller : Arduino Uno R3 ATmega328.
- Operating Voltage : 5V.
- Input Voltage (recommended) : 7-12V.
- Digital I/O Pins : 14 (of which 6 provide PWM output).
- Analog Input Pins : 6.
SKU: n/a -
Boards, Development Boards, Raspberry Pi
Raspberry Pi 3 Model A+
Details:-
- Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @ 1.4GHz
- 2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2/BLE
- Extended 40-pin GPIO header
- Full-size HDMI
- Single USB 2.0 ports
- CSI camera port for connecting a Raspberry Pi Camera Module
- DSI display port for connecting a Raspberry Pi Touch Display
- 4-pole stereo output and composite video port
SKU: n/a -
Boards, Development Boards, Raspberry Pi
Raspberry PI 3 Model B+ 1.4 Ghz 64-bit – 1 GB ram Development Board
-6%
Boards, Development Boards, Raspberry PiRaspberry PI 3 Model B+ 1.4 Ghz 64-bit – 1 GB ram Development Board
Details:-
- Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @ 1.4GHz
- 1GB LPDDR2 SDRAM
- 2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2, BLE
- Gigabit Ethernet over USB 2.0 (maximum throughput of 300 Mbps)
- Extended 40-pin GPIO header, Full-size HDMI
- 4 USB 2.0 ports
- CSI camera port, DSI display port for connecting a Raspberry Pi touchscreen display
- 4-pole stereo output and composite video port
SKU: n/a -
Boards, Development Boards, Raspberry Pi
Raspberry Pi 4 Model B with 2 GB RAM Development Board
Details:-
- 2GB/4GB Varients
- Quad-Core 64-bit Broadcom 2711, Cortex A72 Processor
- WLAN 802.11 b/g/n/ac (2,4 + 5,0 GHz)
- LAN RJ45 10/100/1000 Mbit (Gigabit LAN over USB 3.0)
- Operating Power 5V@3A via USB Type-C Port
SKU: n/a
