espressif
Showing all 11 results
-
-
Boards, Development Boards, ESP
Arduino Mega WiFi R3 Atmega2560 NodeMCU ESP8266 32Mb Memory USB-TTL CH340G Compatible For Mega
-17%
Boards, Development Boards, ESPArduino Mega WiFi R3 Atmega2560 NodeMCU ESP8266 32Mb Memory USB-TTL CH340G Compatible For Mega
Details:-
- It is a customized version of the classic ARDUINO MEGA R3 board.
- Full integration of Atmel ATmega2560 microcontroller and ESP8266 Wi-Fi IC, with 32 Mb (megabits) of flash memory, and CH340G USB-TTL converter on a single board!
- All components can be set up to work together or independently.
SKU: n/a -
Boards, Development Boards, ESP, Others
ESP-01 ESP8266 Development Module
- 802.11 b/g/n Standards
- Wi-Fi Direct (P2P), soft-AP
- 1MB Flash Memory
- Integrated low power 32-bit CPU could be used as an application processor
- A-MPDU & A-MSDU aggregation & 0.4ms guard interval
- Wake up and transmit packets in < 2ms
- Standby power consumption of < 1.0mW (DTIM3)
SKU: n/a -
-
Boards, Development Boards, ESP, Others, Programmers
ESP32 WROOM Module
Details:-
- ESP32-D0WD core
- Supports multiple external QSPI flash and SRAM chips
- 32Mbits 3.3V SPI flash
- 802.11 b/g/n (802.11n up to 150Mbps) Wi-Fi protocol
- Bluetooth v4.2 BR/EDR and BLE
- SD card, UART, SPI, SDIO, I2C, LED PWM, Motor PWM, I2S, and IR module interfaces
SKU: n/a -
Boards, Development Boards, ESP
ESP32 WROOM-32 module with 38 Pins
1. 2.4GHz Dual-Mode WiFi + Bluetooth Development Board, 38PIN
2. Ultra-Low power consumption works perfectly with the IDE
3. Support LWIP protocol, Freertos
4. Support Three Modes: AP, STA, and AP+STA
5. ESP 32 is safe, reliable, and scalable to a variety of applicationsSKU: n/a -
Boards, Development Boards, ESP, Others
ESP8266 NodeMCU CP2102
Details:-
- Open-source, Interactive, Programmable, Low cost, Simple, Smart, WI-FI enabled
- Arduino-like hardware IO
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLL, regulators, DCXO and power management units
- Onboard USB to serial chip to easily program and upload codes from the Arduino IDE
- Embeds logic level converter circuits
- Has onboard 3.3V regulator to ensure enough power to function as your go-to WiFi chip!
- Easy access to the GPIO pins for easy prototyping
- ESP-12E Processor
- Easy to use breadboard friendly form factor
SKU: n/a -
Boards, Development Boards, ESP
NodeMCU ESP8266 V3 Lua CH340 Development Board
- Built-in Micro-USB, with flash and reset switches, easy to program
- Wireless 802.11 supported, direct download no need to reset
- Arduino compatible works great with the latest Arduino IDE/Mongoose IoT/Micropython
- WiFi at 2.4GHz, support WPA / WPA2 security mode
- Supports GPIO, PWM, I2C, SPI, UART and ADC.
SKU: Sm-1001 -
-
Boards, Development Boards, ESP
WeMos D1 R2 WiFi ESP8266 Development Board
Details:-
- This is WeMos ESP8266 D1 R2 V2.1.0 WiFi Development Board. The WeMos D1 is an ESP8266 WiFi based board that uses the Arduino layout with an operating voltage of 3.3V.
- The board is controlled by the ESP8266 chip (a 32-Bit processor) and has a larger flash memory compared to an Arduino Uno. It consists of 11 digital I/O pins and 1 analog (input) pin. the board can be connected using a Micro-B type USB cable.
- The D1 R2 is a WiFi capable ESP8266EX based development board in the form of the Arduino UNO board format. This board is compatible with the Arduino IDE and with NodeMCU.
- The D1 R2 also features an onboard switching power supply which allows you to power the board from a power supply up to 12V.
SKU: n/a
